Cuestionario: Electronics Fundamentals and Circuit Analysis — 10 preguntas

1. What is the primary function of a diode in electronic circuits?

A. To rectify AC to DC

B. To amplify signals

C. To control current flow in a transistor

D. To store electrical energy

Answer: (A)

Explicación

A diode primarily functions as a rectifier, allowing current to flow in one direction (forward bias) and blocking it in the reverse direction, thus converting AC to DC in power supplies.

2. Which component allows current flow in forward bias but blocks in reverse bias?

A. Diode

B. Bipolar Junction Transistor

C. FET

D. Zener Diode

Answer: (A)

Explicación

Diodes are designed to conduct current in forward bias and block in reverse bias, making them essential for rectification and voltage regulation.

3. Which statement accurately describes a Bipolar Junction Transistor (BJT)?

A. It is a voltage-controlled device with high input impedance

B. Its current gain is represented by beta ($\beta$), typically between 100 and 300

C. It operates only in the saturation region

D. It is primarily used as a voltage regulator

Answer: (B)

Explicación

A BJT's current gain, denoted by beta ($\beta$), is the ratio of collector current to base current and typically ranges from 100 to 300, making it a current-controlled device suitable for amplification.

4. In a bipolar junction transistor (BJT), which terminal controls the collector current?

A. Base

B. Emitter

C. Collector

D. Biasing circuit

Answer: (C)

Explicación

The base terminal in a BJT controls the collector current, which is proportional to the base current, making it a current amplifier.

5. What is a key advantage of negative feedback in amplification systems?

A. It eliminates the need for biasing

B. It converts AC signals into DC signals

C. It increases the overall gain exponentially

D. It stabilizes the gain and reduces distortion

Answer: (D)

Explicación

Negative feedback stabilizes the amplifier's gain, extends bandwidth, and reduces distortion, leading to more reliable and linear operation.

6. What is the typical efficiency of a Class B power amplifier?

A. 50%

B. 78.5%

C. 90%

D. 100%

Answer: (B)

Explicación

Class B amplifiers have a conduction angle that allows for about 78.5% efficiency, making them more efficient than Class A amplifiers.

7. Which device is primarily used for voltage regulation via breakdown voltage?

A. FET

B. Zener Diode

C. Operational Amplifier

D. Power Transistor

Answer: (B)

Explicación

Zener diodes are used in voltage regulation by exploiting their breakdown voltage, maintaining a constant voltage across their terminals.

8. What is the main purpose of load line analysis in BJT circuits?

A. To find the maximum current

B. To determine the Q-point by intersecting load line with device characteristics

C. To analyze frequency response

D. To set biasing conditions for the transistor

Answer: (B)

Explicación

Load line analysis helps to find the Q-point by graphically intersecting the load line with the transistor's characteristic curves, indicating the steady-state operating point.

9. Which small-signal model is commonly used for AC analysis of a FET?

A. Hybrid-π model

B. Transconductance model

C. Hybrid-π model

D. Small-signal model is not used for FETs

Answer: (B), (C)

Explicación

The transconductance model is used for FETs in small-signal analysis, relating the drain current to the gate-source voltage, simplifying AC analysis.

10. Which statement best describes the difference between diodes and Zener diodes?

A. Diodes conduct only in reverse bias, Zener diodes conduct in forward bias

B. Diodes convert AC to DC, Zener diodes are used for voltage regulation via breakdown voltage

C. Diodes are used in amplification, Zener diodes are used in switching

D. Diodes have exponential I-V characteristics, Zener diodes do not

Answer: (B)

Explicación

Regular diodes conduct in forward bias for rectification, while Zener diodes operate in breakdown (reverse bias) to provide a stable reference voltage for regulation.